Do you know what the engine rack does?

What does the engine bracket do

Keep engine and gearbox fixed and smooth.
The engine bracket is used to hold the engine in place, so when it goes wrong, it cannot be fixed firmly. So, when the engine is running, there will certainly be a jitter problem, and in the state of high speed, not to mention, not only with the "bang bang" abnormal sound, serious words will cause the engine to fall down.

Cause Of Engine Jitter

However, if the engine wobbles significantly, it is not always the engine frame that is to blame. It is likely that the engine leg glue is faulty. To know that the rubber is the rubber pad between the engine and the frame, when the engine is running, it can effectively reduce the vibration and buffer when the engine works. However, if the usual maintenance is not good, it may be less than 3 years have been very serious damage, then the problem of engine jitter will naturally occur.

In fact, the function of the engine bracket is not only limited to fixing the engine, it can also effectively reduce the vibration caused by the engine during operation. If there is no engine bracket to fix the engine, the engine will inevitably shake in the process of running, and the engine may be damaged at this time.

Bracket is divided into two kinds of a torsion bracket is also a kind of engine foot glue, engine foot glue is mainly fixed shock absorption, mainly said torsion bracket!
Torque bracket is a kind of engine fastener, which is generally connected with the engine on the front axle of the automobile body.
The difference with ordinary engine foot glue lies in that a rubber pier is installed directly on the bottom of the engine, while the torsion bracket is installed on the side of the engine in the shape of an iron bar. There will also be a torsion bracket glue on the torsion bracket, play the role of shock absorption.